Canon EOS 5D Mark IV
Type: Digital, AF/AE
single-lens reflex, camera, Recording
Media: CF card, Type I drive (Type II and Microdrive non-supported.), UDMA Mode 7 supported. CFast cards cannot be used. SD, SDHC and SDXC memory cards, UHS-I supported. Multimedia Cards (MMC) cannot be used (results in error). UHS-II not supported. If a UHS-II card
is used, it may be slower than a UHS-I (depends on the card specifications). Compatible Lenses: Canon EF Lenses (excluding EF-S and EF-M lenses). Lens Mount: Canon EF Mount. Image
Sensor- Type: CMOS sensor
(Compatible
with Dual Pixel CMOS AF). Pixels: Approx. 30.4 megapixels. Pixel Unit: Approx. 5.36 µm square Total Pixels: Approx. 31.7 megapixels. Aspect Ratio: 3:2 (Horizontal: Vertical). Color Filter System: RGB primary color filters Low Pass Filter: Installed in front of the image sensor, non-detachable. Dust Deletion Feature: Self Cleaning Sensor Unit, removes dust adhering to the low-pass filter. Self-cleaning can be done automatically when the power is turned on/ off. After the cleaning is performed, the camera will automatically restart (Power OFF to ON). When you use Multi Shot Noise Reduction, clean now cannot be selected. Dust Delete Data acquisition and appending, The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images. The dust coordinate data appended to the image is used by the EOS software DPP to automatically erase the dust spots. Manual cleaning.
with Dual Pixel CMOS AF). Pixels: Approx. 30.4 megapixels. Pixel Unit: Approx. 5.36 µm square Total Pixels: Approx. 31.7 megapixels. Aspect Ratio: 3:2 (Horizontal: Vertical). Color Filter System: RGB primary color filters Low Pass Filter: Installed in front of the image sensor, non-detachable. Dust Deletion Feature: Self Cleaning Sensor Unit, removes dust adhering to the low-pass filter. Self-cleaning can be done automatically when the power is turned on/ off. After the cleaning is performed, the camera will automatically restart (Power OFF to ON). When you use Multi Shot Noise Reduction, clean now cannot be selected. Dust Delete Data acquisition and appending, The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images. The dust coordinate data appended to the image is used by the EOS software DPP to automatically erase the dust spots. Manual cleaning.
White Balance# Settings:
Auto (Ambience priority/White priority), Daylight, Shade, Cloudy, Tungsten
Light, White Fluorescent Light, Flash, Custom (Custom WB), Color Temperature. Effective also in twilight and
sunset. Auto White Balance: Option between ambience priority and
white priority settings. Color
Temperature Compensation: Blue/amber
bias: ±9 levels. Magenta/green bias:
±9 levels. Corrected in reference to
the current WB mode's color temperature.
Color Temperature Information Transmission: Provided. Viewfinder#- Type: Eye-level SLR (with fixed pent prism). Coverage: Approx. 100% vertically and horizontally (at approx. 21mm eye
point). Magnification: Approx. 0.71, Eye Point: Approx. 21mm (at -1m-1 from the eyepiece lens center). Dioptric Adjustment Correction: Adjustable from approx. -3.0 to +1.0
m-1 (dpt). Focusing Screen: Fixed. Mirror: Quick-return
half mirror. Viewfinder Information:
Displayed with transparent liquid crystal,
AF point information, AF
operation, Area AF frame, Metering
mode, Spot metering circle, Image
quality, Electronic level (dedicated indicator), Digital Lens Optimizer, Battery
(remaining capacity), Dual Pixel RAW setting (shooting), Shooting mode, Flicker
detection, White balance, Warning symbol, Drive mode, AF status indicator, You can select whether or not to
display the asterisked items [Show/hide in viewfinder]. Depth Of Field Preview: Enabled
with depth of field preview button.
Autofocus# Type: TTL
secondary image-forming phase-difference detection system with AF dedicated
sensor. Focusing Modes: Autofocus, One-Shot AF, Predictive AI Servo AF (AI Servo AF III). AI Focus AF: Switches between
One-Shot AF and AI Servo AF automatically.
Manual focus. AF Point Selection: Single-point Spot AF (Manual
selection), Single-point AF (Manual
selection), The checkmark cannot be
removed from this option. AF point
expansion (Manual selection, 4 points: Up, down, left and right), AF point expansion (Manual selection,
surrounding 8 points), Zone AF
(Manual zone selection), All AF
points divided into nine focusing zones.
Large Zone AF (Manual zone selection),
All AF points divided into three focusing zones. AF point Auto selection AF.
Active AF Point Indicator: Displayed
in viewfinder with transparent LCD and on LCD panel, AF Assist Beam: Enable, Disable, IR AF assist beam only. Shutter# Type: Vertical-travel, mechanical,
focal-plane shutter with all speeds electronically-controlled. Shutter Speeds: 1/8000 to 30 sec., bulb
(Total shutter speed range. Available range varies by shooting mode.) X-sync at 1/200 sec. Shutter Release: Soft-touch
electromagnetic release. Self Timer: 10-sec.
self-timer, 2-sec. self-timer. Drive System# Drive Modes, Single shooting, High-speed
continuous shooting, Low-speed
continuous shooting, Silent single shooting, Silent
continuous shooting, 10-sec. self-timer/remote control, 2-sec.
self-timer/remote control. Continuous
Shooting Speed: High-speed continuous shooting: Max. approx. 7.0 fps, With
1/500 sec. or faster shutter speed, maximum aperture (varies depending on the
lens), with a fully-charged Battery Pack LP-E6N, and at room temperature
(73°F/23°C). The maximum continuous shooting speed will decrease under the
following shooting conditions: [Anti-flicker shoot.: Enable] results in maximum
approx. 6.6 fps. [Dual Pixel RAW: Enable] and RAW or RAW+JPEG image quality. [Digital
Lens Optimizer: Enable] will greatly decrease the continuous shooting speed. The
continuous shooting speed may become slower depending on the shutter speed,
aperture, subject conditions, brightness, lens, flash use, temperature, battery
type, remaining battery level, etc. With the AF mode set to One-Shot AF and the
Image Stabilizer turned off when using the following lenses: EF 300mm f/4 L IS
USM, EF 28-135mm f/3.5-5.6 IS USM, EF 75-300mm f/4-5.6 IS USM, EF 100-400mm
f/4.5-5.6L IS USM. In AI Servo AF operation, the continuous shooting speed may
become slower depending on the subject and the lens used. If you use Battery
Pack LP-E6 and shoot in low temperatures (battery temperature is low), the
high-speed continuous shooting speed may become slower. The continuous shooting
speed may become slower if the remaining battery level is low or if you shoot
under low-light conditions. Low-speed continuous shooting: Max. approx. 3.0 fps,
Silent continuous shooting: Max. approx. 3.0 fps.
LCD Monitor# Type: TFT color, liquid-crystal monitor, Monitor Size: 3.2-inch (Screen aspect ratio of
3:2),
3.19 in./8.10cm diagonal (2.65 in./6.74cm width, 1.77 in./4.49cm
height). Pixels: Approx.
1.62 million dots. Coverage: Approx.
100%.
Viewing angle: 170° vertically and horizontally. Brightness Control: Automatic Manually adjustable to
one of seven brightness levels. Coating: Clear View LCD II Anti-smudge coating Anti-reflection coating. Interface
Languages: 25 (English, German,
French, Dutch, Danish, Portuguese, Finnish, Italian, Norwegian, Swedish,
Spanish, Greek, Russian, Polish, Czech, Hungarian, Romanian, Ukraine, Turkish,
Arabic, Thai, Simplified/Traditional Chinese, Korean, Japanese). Playback#
Display Format: Single image
display: No information display, Basic information display, Detailed
shooting information display, Basic shooting information, Lens/histogram
information, White balance information, Picture Style information 1, Picture
Style information 2, Color space/noise reduction information, Lens aberration
correction information 1, Lens aberration correction
information 2, GPS information, IPTC information (First for EOS), Index
display:, 4-image index, 9-image index, 36-image index, 100-image
index.
Highlight Alert: With
single-image display (Info.) and single-image display, the white areas with no
image data will blink. Quick Control Function# Items: Pressing the Quick Control button
displays the Quick Control screen during viewfinder shooting, Live View
shooting, movie shooting and playback. Image Protection and Erase# Protection:
Erase protection can be applied or canceled for a single image (select
image), all images in a folder or all images in the card. Erase: Erase a single image (playback and erase image), selected
images, all images in a folder or all images in a card.
DPOF: Digital Print Order Format# DPOF: Compliant to DPOF Version 1.1. Direct
Image Transfer# Compatible Images: JPEG
images, RAW images, Movies. Customization# Custom
Functions: 17 Custom Functions
settable with the camera. Custom Controls: Functions can be assigned to the following buttons: Shutter
button halfway pressing, AF-ON button, AE lock button, Depth
of field preview button, Lens AF stop button, Multi-function
button, SET button. Main Dial, Quick Control Dial, Multi
controller, AF area selection button. Camera
User Settings: Current camera settings can be registered to C1, C2 and C3
on the Mode Dial. My Menu Registration:
Up to six top-tier menu options and Custom Functions can be registered. Up to five My Menu tabs can be
added. My Menu tab overall operations, adding a tab, deleting tabs in a batch, deleting
all tab items, Setting the menu display, My Menu tab detailed operations, Selecting
a registered item, Sorting registered items, Deleting selected registered items,
Deleting registered items in a batch, Deleting tabs, Changing a tab name (16
ASCII characters). Interface# USB Terminal: For computer communication, For WFT-E7
(Ver.2.0) connection, For Connect Station CS100 connection, Video Out Terminal: HDMI Type C
(Resolution switches automatically), CEC compatible Images can be displayed
through the HDMI output and on LCD monitor at the same time. Images will not be
displayed unless [NTSC] or [PAL] is properly set according to the video system
of the TV set.
Power Source# Battery: Battery Pack LP-E6N (or LP-E6) x 1, With
the AC Adapter + DC Coupler, AC power is possible. When the Battery Grip
BG-E20 is used, two battery packs (LP-E6N or LP-E6) can be installed. Configuration,
Shooting Method, Battery, Temperature, Possible. Shots. Camera, Body, Only, Viewfinder
shooting, LP-E6N, At 73°F/23°C, 900, At 32°F/0°C, 850, Live View Shooting,
LP-E6N, At 73°F/23°C, 300, At 32°F/0°C, 280, With Battery Grip, BG-E20,
Viewfinder shooting, LP-E6N x2, At 73°F/23°C, 1800, At 32°F/0°C, 1700, Live
View Shooting, LP-E6N x2, At 73°F/23°C, 600, At 32°F/0°C, 560. Battery Check: Automatic battery check
when the power switch is turned ON. Displayed in 6 levels. Battery level
displayed on the LCD panel and in the viewfinder. One of six levels displayed
for LP-E6N and LP-E6. The display for other power sources is different. Power Saving: Power turns off after the
set time (1, 2, 4, 8, 15 or 30 min.) of non-operation elapses. Even when you
set the date, time or zone and 1, 2 or 4 min. is set, it will take 6 min. for
auto power off to take effect. Date/Time
Battery: Built-in secondary battery,
when fully-charged, the date/time can be maintained for approx. 3 months, Recharge time: approx. 8 hr. The
recharge time required to provide the above number of months with no battery
pack installed. Start-up Time: Approx.
0.1 sec, based on CIPA testing standards. Dimensions and Weight# Dimensions (W x H
x D): Approx. 5.93 x 4.58 x 2.99
in. / 150.7 x 116.4 x 75.9mm. Weight: Approx. 31.39 oz. / 890g (Including battery, CF card and SD
memory card). Approx. 28.22 oz. / 800g (Body only; without battery, card, body
cap and eyecup), Operating Environment# Working Temperature Range: 32-104°F/0-40°C, Working
Humidity Range, 85% or less.
Buy
WATCH VIDEO:
No comments :
Post a Comment